Sandretto 350 Ton Injection Moulding Machine, 1990

Clamping force: 350Tonne
Shot weight: Approx 1.2 Kg
Screw dia: 70mm
Control: SEF81D, in English
Mould opening/closing height: Min 200mm ; Max 650mm
Tie bar distance: 600 x 600mm
Documentation in English
                 

DEMAG D-325 NCIII INJECTION MOLDING MACHINE, 1991

S/N: 825-0196
Control: DEMAG NCIII
Clamping force: 325 ton
Screw diameter: 60 mm
L / D ratio: 19,7
Without a differential circuit: 1870 bar
With differential circuit: 1530 bar
Displacement: 635 cm3
Shot weight (PS): 570 g
Opening stroke: 600 mm
Mould height min: 330 mm
Mould height max: 770 mm
Platens Max: 1370mm
Tie bar spacing (H x V): 630 x 630 mm
Ejection force: 70 kN
Retraction force: 39 kN
Metering sleeps Max: 225 mm
Metering max: 500mm
Nozzle immersion depth (SVO): 50mm
Nozzle contact: 110 kN
Install cylinder heating power: 18,8 kW
Full hopper: 110 l
Oil tank: 580 l
Pump unit: 37/45 kW
Instill total power: 56/64kW
Dry cycle number
Net weight closing leg unit: 9.200kg
Net weight spray unit: 5.000kg
Dimensions: 7.8 x 1.85 m
Fixing Holes: M24; Cores: 2
Hopper weights: 4.309kg
PRESSFLOW Robotic Unloader with Control Unit JOHNS Mould Clamping System,
MATTEC Shift Control Panel DEMAG LET 6
     

ENGEL ES 3550/600 HL-V TIEBARLESS INJECTION MOLDING MACHINE

Year: 2005
Control: CC 100
Operating Hours: 54267 h
Clamping Unit
Clamping Force: 600 Ton
Opening Force: 300 kN
Opening Stroke: 1200 mm
Mould Height (Min/Max): 500 / 1200 mm
Daylight Max.: 1700 mm
Platen Size (HxV): 1580 x 1300 mm
Mold Weight max.: 7800 kg
Ejector Stroke: 250 mm
Ejector Force: 110 kN
Dry Operation (Euromap 6) time: 3,8 sec
Dry Operation (Euromap 6) stroke: 600 mm
Injection Unit 1
Screw Diameter: 70 mm
Screw Stroke: 390 mm
Injection Capacity: 1500 cm³
Screw Speed Max.: 150 r/min
L/D Ratio (3-zone screw): 20 L/D
Recovery rate (3-zone screw) 3): 37 g/sec
L/D screw length (Barrier): 22 L/D
Plasticizing Capacity (Barrier) 5): 61 g/sec
Injection rate: 350 cm³/s
Injection rate with increased injection pressure: 295 cm³/s
Injection Pressure (regenerative): 2250 bar
Specific Injection pressure increased: 2300 bar
Nozzle Stroke: 700 mm
Nozzle contact pressure: 150 kN
Heating capacity standard 7): 42 kW
Number of the heating zones incl. nozzle: 6
Rated drive power: 55 kW
Oil reservoir capacity: 1850 l
Weight
Net clamping + Injection Unit: 36500 + 10000 = 46500 kg
Core: 2 Hydraulics
Interface robot: Yes
Air blown expulsions: 1
Bi metal: Yes