Fanuc Tape Cut Model H A04B-0204-B043 Non-Submerged CNC Wire Cut EDM

With Fanuc CNC Control and Non-Submerged Cutting Work Table Size: 670 x 450mm,
X Axis Travel: 300mm, Y = 400mm, Z = 230m, S/No. 281536. With water tank & with step-down transformer
                 

Hitachi H-CUT304P A02B-0084-B201 Non-Submerged CNC Wire Cut EDM

With Fanuc SP23 CNC Control and Non-Submerged Cutting, Work Table Size: 600 x 450 x 170mm,
X Axis Travel: 300mm, Y Axis Travel: 400mm, Z Axis Travel: 170mm, S/No. 8080105.
           

Mecrode Maxim Plus 3-Axis CNC EDM Machine (Spark Erosion)
With Mecrode 901 Generator,With Mecrode 901 Generator, Heidenhain CNC Control, Rise and Fall Work Tank, Max. Work piece Dimensions: 800 x 600 x 400mm, Axis Travel: 400 x 300 x 200mm, S/No. 650035.
                 

Charmilles D20 Manual EDM Machine (Spark Erosion)

With Charmilles P25 25amp Generator, Charmilles Microfin, System 3R Orbicut, Fire Prevention System, Adjustable Chuck, Axis Travel: 250 x 150 x 150mm S/No. 60563
                 

Eurospark 740 Spark Eroding Machine with '50A' Controller

Spark Eroding Machine with '50A' Controller - 2KVA, S/N: 3912-L
'T' Slotted Table Size 430 x 305mm, Tank Size 550 x 345 x 250mm Deep,
System 3R Tooling 3819-K
           

Charmilles Model D1-T Die Sink EDM

With Charmilles Isopulse P3 Controls
S/No: 70232
Table Area: 600mm x 400mm.
Tank Area Approx Deep: 820mm x 500mm x 320mm.
With 2 Axis DRO
           

Charmilles Model D20 Die Sink EDM

With Charmilles Isopulse 25 ControlsTable Area 450mm x 340mm. Tank Area Approx 580mm x 420mm x 320mm Deep. With 2 Axis DRO. S/No 60291
                 

Eurospark Model AP50-10C Die Sink EDM
Table Area 550mm x 350mm
Tank Area Approx 630mm x 410mm x 400mm Deep.
With 2 Axis DRO